GoPro Mount for Reptile Cloud-149HD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This GoPro Hero8 mount is designed to fit the Cloud-149HD drone frame, not the original Cloud-149.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This GoPro Hero8 mount is designed to fit the Cloud-149HD drone frame, not the original Cloud-149. It may work using only two mounting screws and the zip-ties, but I don't recommend it at all.
This model was created from a tutorial on GoPro Hero8 mount design using Fusion 360, the video of which can be watched here:
It is designed to print flat without supports - some areas may require bridging calculations.
TPU is the intended printing material for its flexibility and vibration damping properties. It could also be printed with other non-flexible materials, however it's more likely to shatter in the event of even a mild impact.
In terms of mounting hardware, I used parts from an existing generic GoPro mount that I already had. The hole is 5mm, and the hexagonal inset should receive an M5 cap nut or regular nut.
Notes:
May require bridging calculations, slower printing speed will produce better quality around the mounting tabs and on the overhangs