1 / 10
Dock for AirPods Pro and Apple Watch (with or without a protective cover on the watch) — zdjęcie 1
1 / 10

Dock for AirPods Pro and Apple Watch (with or without a protective cover on the watch)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This charging base was made for my Apple Watch Series 7 45mm with an Otterbox protective case and AirPods Pro V1

Ocena
0 / 5
Polubienia
13
Pobrania
92
Wydruki
0
Wyświetlenia
715
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This charging base was made for my Apple Watch Series 7 45mm with an Otterbox protective case and AirPods Pro V1

It also has a second base for use with a bare watch. 

This was made to use the 2022 USB-C cables supplied with the devices from Apple. 

Lightning plug hole for AirPods is 9.14mm x 5.50mm and it is held in place with a screw.

The watch charger is a press fit, Hole is 27.8mm in dia, no glue required. 

It requires 3 off M3x10mm Cap screws (every Prusa printer has these left over)

This was inspired by https://www.printables.com/model/99062-dock-for-airpods-pro-and-apple-watch-all-models-al 

Mine was printed on my Prusa MK3S in Galaxy Black PETG

Print at 10% infill (adaptive cubic) no supports are required on the base pieces and supports only required just in the middle of the top part. (all setup in the 3MF file)

Just hide the base you don't want at the time of slicing.