Shockwave Hammer (Fortnite C4S1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shockwave hammer item from Fortnite chapter 4 season 1, included is a 3mf file already colored for use with the X1C.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 326
- Wydruki
- 0
- Wyświetlenia
- 1944
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
Model was ripped from Fortnite using the Fortnite Porting tool for Blender and modified slightly with meshmixer and a few other programs to get to a printable state.
https://github.com/halfuwu/FortnitePorting
Included are two versions, one scaled for my hasbro bushranger figure, the other scaled and cut for a 10mm dowel to act as the handle of the hammer, as well as colors already designated for multicolor printing on a Bambu Labs X1C. You should be able to print the model in one single color too if you wanted to just paint it instead. The length of the dowel should be about 300mm to keep it to scale with the rest of the model. The holes for the dowel are created using the “add negative part” tool in the slicer, and may not be available in other slicers.
I haven't made the larger version yet, but when the filament I purchased for it arrives I will post more photos.
Happy printing!