Hystou P09-6L Power Button Cover

I bought two Hystou P09-6L fanless computers from China. They are great machines btw., but have an annoying blue power button LED.

Quickly created a cover, which can be plugged in the HDMI port (I don't need it anyway). You will find three orientations of the power icon in the downloads.

It's a two color print which you also can print with single extruder printer without a multi filament option.

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Print instructions

Download the two corresponding files (f.ex. "...-01.stl" and "...-01-inlay.stl")

There are multiple ways to print the two colors, and I'm sure there is an easier one than i did:

1. Open "...-01.stl" and " in Prusa slic3r
2. Right-click the part in the list on the right and select "Add part >> Load..."
3. Select the "...-01-inlay.stl" part
   They should be aligned properly now
4. Right-click the main part (...-01.stl) in the list and click "Change type" and set it to "Support Blocker).
   If you slice it now, you should only see the power icon
5. Print it in the color you want and remove the skirt (and only the skirt) if you added one
6. Change the type of the main part back to "Part" and set the type of the inlay (...-01-inlay.stl) to "Support Blocker"
7. Change the filament to the color of the main part
8. Print the main part. It should print perfectly around the inlay.