1 / 3
Raleno PLV-S116 Holder for Film Scanning (Remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed with a couple changes
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 885
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (17)Powiązane
Remixed with a couple modifications from the original design by Tchitchi.
- Flipped X axis to give access to the charging ports on the other side for wired operation.
- Widened the screw-mount hole to accommodate the original Raleno hot-shoe light stand.
I've also designed an adapter plate found here that will combine this light with the modular film scanner system created by RODSGEAR.
Print guidelines:
- Print vertical with flat side wall at the bottom
- 0.3mm layer height
- Use paint supports + snug supports