D&D initiative marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple parametrized markers to put over your DM screen.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
Before printing / Customization
Adjust the nozzle size in the variables of the file to fit yours, this will only change the width of the bottom wall. All the STLs have been generated with a 0.6mm nozzle in mind.
Other variables are available at the top of the .scad file.
I scripted the generation of my batch using the CLI provided with OpenSCAD. The Python script can also be found in the files, but is only tested on macOS (and more specifically only tested on my machine ).
Print instructions
Make sure your slicer generates the first top layer parallel to the sides and not in diagonal. See the picture below.
No supports. Add a color change to highlight the text.
After printing, use a pair of pliers to remove the thin wall at the bottom of the marker.
