1 / 3
Outer Wilds Echoes of the Eye - Sealed Vault — zdjęcie 1
1 / 3

Outer Wilds Echoes of the Eye - Sealed Vault

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sealed vault from Outer Wilds - Echoes of the Eye.

Ocena
0 / 5
Polubienia
23
Pobrania
148
Wydruki
0
Wyświetlenia
1790
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution

This is a model of the sealed vault from Outer Wilds - Echoes of the Eye. It's obviously not an exact replica as I took some artistic licence to make it printable. Designed in Fusion 360, with some decoration added in Blender.

Printing instructions
===============

The Vault - I was able to print this standing upside-down, supports from build plate only. Nothing complicated. Try and use a filament that is not translucent when printed.

The Seals - These are more complicated. Print face down with no supports. You need two filament colours, and both should be translucent once printed (I tried using a filament that wasn't very translucent and it didn't look good). I used a Grey colour and a White. Use an M600 filament change to isolate the layer at the back that you want to be most translucent. So, in my case, it went Grey → White → Grey (two filament changes). I tried to take a screenshot in PrusaSlicer to show what I mean. 

 

I used this LED strip. Literally just stuffed it inside the model  - Criacr LED Strip Light, 1 M 30 LED USB TV Backlight, 19 Modes, 20 Colors, IP65 Waterproof USB Bias Lighting Kits with Remote Control, Changing Lighting Strip for Home, TV, Party, Christmas, Decoration : Amazon.co.uk: Lighting

Tagi