Satisfactory 1/20 scale building models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scaled models of buildings from Satisfactory. Some with optional holes for 6x3mm magnets.
- Ocena
- 4,667 / 5
- Polubienia
- 165
- Pobrania
- 684
- Wydruki
- 2
- Wyświetlenia
- 4219
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
Scaled models of buildings from the game Satisfactory. With optional holes for 6x3mm magnets (here are the magnets I used). You can use them with a whiteboard for a more tedious but tactile factory planning experience! Fun to look at, especially for kids. My favorite so far is the Coal Generator.
I will add more models as I have the time to tune them for printing. Some of the existing magnet-holed models need some tuning too.
General print settings:
Infill: 10%
Supports: Strategy depends on the model. You may also have to manually add supports in a few places (the satellite dish on the Awesome Sink for instance or the motor-area of the Coal Generator). Cura has a good plugin to do this. I've tried to add a brief note to each file summarizing what support strategy worked for me. Since the models are small, a higher minimum overhang (like 70-85deg) can work.
Resolution: 0.2