Raspberry PI tripod and camera support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a support to be able to attach a Tripod to a Raspberry PI and a Camera module and use my 4inch LCD
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This a support to be able to attach a Tripod to a Raspberry PI and a Camera module and use my 4inch LCD .
I wanted to use my RPi waveshare 4inch LCD with the camera and display the video and/or photos while using it with some ML projects.
Because the HQ camera already brings a 1/4'' female thread adapter and I had a tripod that I wanted to use, so I've design this.
To be able to use it with a tripod, just add a Knurled Thumb Nut 20*12.7*8.7, like this ones on Amazon
and push it there in the hole with a hot solder iron to melt the plastic.
Use some standoffs from the Raspberry PI to the camera support.