Filamentive Spool Adapter for Bambu Labs AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Filamentive spools. Enables 750g spool to be used in Bambu Labs X1 AMS.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 1462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Designed to snuggly fit over the sides of the Filamentive spools to enable them to work in the Bambu Labs X1 AMS. I designed it so the bump on the inside aligns with the hole on the sides of the spools, this should stop any rotation and also ensure the label and filament holes are visible in the little window.
I printed mine in some leftover ABS I had lying around but I'm sure most filaments will work fine.
I have found that the lid on the AMS may not close fully with these spool adapters on so your AMS won't be quite as air tight.