iWantOne Junior
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is roughly a 50 mm spherical shape. If you want to use it for stress relief, TPU is strongly recommended. If you…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is roughly a 50 mm spherical shape. If you want to use it for stress relief, TPU is strongly recommended. If you want it to be like a logo, you can remove the "bite" yourself. This is the version before Adam & Eve, or Steve, got hold of it.
Print Settings
Printer:
Any that prints TPU (most of them)
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
Low as possible to print (10% or less)
Filament:
NinjaTek Ninjaflex is probably best TPU 85A or more elasticAny color filament - I like orange.
Notes:
25% infill makes a decent bouncy ball. 10% or less makes a better stress reliever.
Category: Toys & Games