iPad 3d printed stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this stand for my iPad 2th, but the shape it’s based on iPad 7th.
- Ocena
- 4,75 / 5
- Polubienia
- 11
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1265
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I made this stand for my iPad 2th, but the shape it’s based on iPad 7th. After all, should fit to all modern tablets and smartphones. This design requaire no screws. Just quick-lock joint. Print this with a (tiny) supports. Infill about 10-20%. Material – probably something stronger then PLA, but who knows… Printing time is about 100 minutes with a 0.4 nozzle. Also, you can put a tiny magnet (5×5) on the back in hinge. But this is optional. In (my blog) download, you will find also .step files.
https://theveel.com/druk-3d/coviddesign-ipad-3d-printed-stand
Print instructions
Category: 3D Printer Accessories Summary
I made this stand for my iPad 2th, but the shape it’s based on iPad 7th. After all, should fit to all modern tablets and smartphones. This design requaire no screws. Just quick-lock joint. Print this with a (tiny) supports. Infill about 10-20%. Material – probably something stronger then PLA, but who knows… Printing time is about 100 minutes with a 0.4 nozzle. Also, you can put a tiny magnet (5×5) on the back in hinge. But this is optional. In (my blog) download, you will find also .step files.
https://theveel.com/druk-3d/coviddesign-ipad-3d-printed-stand
Print Settings
Printer Brand: MK3
Printer: Prusa i3
Rafts: Doesn't Matter
Supports: Yes
Infill: 10-20