Clean Dirty Dishwasher sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dishwasher slider sign
- Ocena
- 4 / 5
- Polubienia
- 31
- Pobrania
- 289
- Wydruki
- 4
- Wyświetlenia
- 1630
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This is a remix of Jimbotron's Dishwasher slider on thingiverse (Clean Dishes, Dishes Dirty, dishwasher sliding sign by Jimbotron - Thingiverse).
I didn't have the magnets he was using, so I remixed it with 8 6x2mm magnets that I had. Added a drop of superglue in the hole to hold the magnet.
I also added a small handle on the slider to make it easier to slide back and forth.
The slider will need to be printed face up with supports.
0.2 mm layer height.
Color Changes on Base
Start with Gray
@ 3.0mm or Layer 15 change to Red "for Dirty"
@ 3.8mm or Layer 19 change to Green "for Clean"
@ 4.4 or Layer 21 change back to Gray
Color Change for Slide (Printed face up: supports needed), I also printed at 101% to allow it to slide easier.
Start with Gray
@ 7.0 mm or Layer 35 change to Black "for Dishes"
@ 7.8 mm or Layer 39 change back to Gray
I used a drop of glue on the base to keep the slide from coming off.