Bambu Labs P1P - Wyze Cam v3 Mount Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the model by PrinterPro. Made to fit the Wyze Cam v3 on a P1P with no armor/enclosure etc.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 220
- Wydruki
- 2
- Wyświetlenia
- 1564
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple Wyze v3 mount for the Bambu Labs P1P. I found that PrinterPro's version did not fit the v3 cam specifically, I believe it is for a different model. I basically just took their model and another model of a Wyze v3 clamp that I found online and fused them together in TinkerCAD.
If you inspect the model, you will notice that the geometry is definitely a bit off in some places, but I was able to print it on my P1P just fine so I am happy with it. I did use supports for where the camera actually fits in but I think it could be printed without any.
There are screws that came with your P1P labeled “For DIY Case” (or something like that) in your extra hardware box. You can use 2 of these screws to secure the mount to the printer in the location as shown in the pictures!
Here is a link to the camera on Amazon.