Terminal block case/housing - Lüsterklemme Gehäuse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small but functional case/housing for terminal blocks
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 1141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I use these terminal blocks (german: Lüsterklemme) on my custom build 3d printer and thought a case would be pretty neat and more secure. So I made these terminal cases.
Since I use a modded ATX PSU for my printer and the electronics inside its IKEA LACK housing, the voltage (12V and 5V) is imprinted on the surface. There are also versions with 230V and nothing on it.
Use some small self tapping screws (2.5mm or 3mm diameter) to screw the top to the case. I may add cases for M3 press nuts but don't have any right now.
Update 2023-02-27:
Reupload of the cases because I missed the depth of the screw holes -.- If you already printed the old version, just drill the holes for the appropriate depth.