Stargrip / Sterngriff M8 | for nuts and screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stargrip for M8 nuts or hexbolts
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to replace the all-plastic wingnuts on my Black+Decker Workmate. I took the opportunity to design my own stargrip - I do think they work best for nuts, but you can install M8 hexscrews as well (but give them some serious glue, so they won't disengage when you push them).
A little cap will hide the nut/screw inside, it's purely cosmetic though. I printed it in orange TPU to fit some bumpers I installed on the same workbench.
I printed it with the fuzzy skin option to get even more grip, as PLA tends to be a bit slippery. Depending on your usage 25% gyroid infill should be fine, in my scenario I don't screw it super tight. 3-4 walls and you are golden