Falcon SRx2 Board Mount / PSU Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PSU Mount for Falcon SRx2 Controller. There are 2 versions available. 1) MW LRS 350 - Fits standard Meanwell/Generic…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
PSU Mount for Falcon SRx2 Controller.
There are 2 versions available.
MW LRS 350 - Fits standard Meanwell/Generic PSU's
MW LRS 600 - Fits thin Meanwell LRS 600 PSU's
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Spacers are designed to fit into the hole on the top of the mount. Your printer tolerance will have to be dialed in, or it may not fi.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
8x - M3 - 12mm bolts/nuts (secure controller to mount)
Links:
SRx2 Controller - https://pixelcontroller.com/store/long-range-expansion/83-srx2.html
MW LRS 350 - https://www.amazon.com/LRS-350-24-Enclosed-Switching-Replacement-Termina
MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232
Category: Electronics