Snapmaker J1 Interior Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Works with 8mm rod (85mm long) There is also a base plate. I have printed this from TPU
- Ocena
- 4,5 / 5
- Polubienia
- 25
- Pobrania
- 256
- Wydruki
- 4
- Wyświetlenia
- 2284
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 11.03.2023: Spoolholder1 replaced by Spoolholder2
Update 06.03.2023: Base plate V2 left and right with mount for ptfe tube.
Works with 8mm rod. So the spool cannot easily slip off the stand and damage the printer. The spool holders from “dancan13f” and “purchenzupoden” were adapted for the stand.
https://www.printables.com/de/model/18050-generic-spool-holder
Have been fitted with 608 ball bearings.
https://www.printables.com/de/model/65651-universal-filament-spool-holder
Spoolholder and Spoolholder nut were shortened
For the spools, where the holders are too much (for example Spectrum) I use these adapters:
https://www.printables.com/de/model/105218-spool-adapters-for-22mm-bearings/files
If you print this please leave a rating and a photo of your print. I would love to see your print.
Thanks :)
For mounting on the existing screw holes with M3 x 16mm
Print Settings
Rafts: No
Supports: Doesn't Matter
Resolution: 0.2
Infill: 25% (5% TPU base plate)