Cat Treats Dispenser Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Let your cat find out how to get to the treats.
- Ocena
- 4,75 / 5
- Polubienia
- 225
- Pobrania
- 618
- Wydruki
- 4
- Wyświetlenia
- 4002
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
 |  |
My beta testers really liked the toy, but the grid didn't have a chance. Next step: Glue it to the stand.
Printable without supports. The tube is open on one side so you can easily put in the treats. The other side is closed for better bed adhesion while printing. I recommend using a brim.
I've updated the .stl so the grip between stand and tube is better. It should hold perfectly now. The stand's bottom has a bit of a bending problem when you have a flexplate and remove the stand while it's still warm. You can get rid of the bend with a hairdryer.
There are tubes with 2, 3 or 4 holes. They are 1.2 cm wide. You can decide how easily your cat gets the treats ;) I've also added an optional grid to make it a little harder to get to the treats after they've fallen out of the tube. If you use the grid, you should glue it to the stand… or you have the grid stuck on a cat's paw - your choice.
You can also choose a closed bottom now to add some hex blocks.