2014 Toyota Rav4 dashboard trim phone mount, Quadlock compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed it to My Friend who has a 2014 Toyota Rav4 and uses Quadlock phone cases.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 2058
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
To complete one mount You will need:
rav4-phone-holder-v4_quadlock (one piece, I do not recommend to print this due to the lost details of the splined portion which is the interface for the Quadlock system).
or:
rav4-phone-holder-v4_base or rav4-phone-holder-v4 with hook AND rav4-phone-holder-v4 Splined part, these pieces You need to glue together, the 3 holes are for pieces of filament to make the bond a bit stonger.
Additional hardware:
M5 nut
Foam strip on bottom 3-4 mm thick to avoid scratches and rattling on the trim piece.
Note:
I included the rest of the system just in case. The “top” and "base for retainer" pieces are not compatible with the original product, only the splines are the same (or close enough). If You want to use the “retainer” piece, You should find or fabricate a spring for that for example from a piece of steel wire.
Preinted from eSun Black PETG.