1 / 4
Logitech C920 mount for the Honeycomb Storage Wall — zdjęcie 1
1 / 4

Logitech C920 mount for the Honeycomb Storage Wall

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

While it's easy to mount this camera to the top of any monitor, even typing jostles it. Mount to the wall for stability!

Ocena
4 / 5
Polubienia
39
Pobrania
128
Wydruki
1
Wyświetlenia
813
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

While it's easy to mount this camera to the top of any monitor, even typing jostles it. Mount to the wall for stability!

While I designed it for the C920, it will likely work for a variety of different webcams which have ¼-20 tripod mounts on their base.

This model requires an additional ¼-20 screw as a ‘vitamin’ to secure the camera to the mount. I used a 3/8" length, but this may vary depending on the camera type.

The model/STL are oriented in their natural position, but should be printed with the model upside down; the top face is continuous, and the model will print without supports.

Tagi