LTT Screwdriver Case - 12Bit and 24Bit Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just annother case for the LTT screwdriver.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 1630
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Just another case for the LTT screwdriver.
I sliced the model with PrusaSlicer 2.5.0 without adjusting any setting and printed it with the inside of the case facing down.
Added a version 2:
- added 2 pairs of magnets at the latch
- deepened the top recess to fit standard length bits (25mm)
Added a version 3:
- fits 24 instead of 12 extra bits
- V3 is 30mm longer
What you need additionally:
- 16 neodymium magnets 5x1mm (20 if you print Version 2)
https://www.amazon.de/dp/B07T13H3R5?psc=1&ref=ppx_yo2ov_dt_b_product_details - 3 mini barrel hinges 25x5mm
https://www.amazon.de/dp/B093PMWZGG?psc=1&ref=ppx_yo2ov_dt_b_product_details
The magnets have to be glued into place with superclue. Don't use hot glue or any other “thicker” type of glue, because the magnets won't be flush with the surface otherwise.
Print Settings:
- Resolution: 0.20
- Supports: yes
- Infill: 15%
- Filament Material/Brand: PLA/Das Filament
- Color: Schwarz matt & Reinorange
Printed with Prusa i3 MK3S.
Be aware that the relatively hard PLA might scratch the screwdriver surface. But that's the same with any case made out of hard plastic.