Cutter with lenght stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Cutter with lenght stop
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Please post your makes !
24/02/2023
UPDATED "MAIN V1.2.STL" Correction to the rule numbering
13 January 2019
Added Blade cover
Hi !
I had to cut one thousand of small pieces of foam, all with the exact length.
I didn't find anywhere the right tool, so i design one.
I design this tool beased on these cheap and common blades i own
http://s.click.aliexpress.com/e/crXH9ul6
check if the dimensions are the same as the one you got.
I think standard blades can fit.
2 x M3 screws with rounded caps and nuts needed
but any hardware m3 can fit.
Only the "stopper" part need support touching the bed and has been optimized to be print vertically
Maybe you will have to sand a little bit the stopper part in order to remove the material used for the support and in order to align this part with the "0" on the ruller and have this part to the closest position beside the blade.
Please like and post your makes !
Happy printing
Renaud