Digital caliper coin cell to AA battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use AA battery for caliper using coin cell.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 931
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
The snap fitting is bit difficult to snap on, I had to remove the caliper screw for piece to fit. Print and glue the AA cell housing separately so you don't have to use any support.
For wire connection, I used a small piece of aluminum foil. You could try something else maybe a better connection.
Cell piece is for the better fitting of wire, since I was cheap and lazy and just used simple wire.
For the cover, the size is 14mmx17mm, so the print is small might not come perfect in 1st try. Mine had some issues around the slit for wires, they were bit rounded.