Chimera 7 Hero 11 Mini Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Available in 25, 30, and 35 degree angles!
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
~This uses a the GoPro case made by Pokey (?). If anyone knows where the link to the original material is, please let me know so I can give proper credit where it is due~
This mount should work with any somewhat modern iFlight Chimera 7, but I have only tested it with a Chimera 7 Pro V2. I just took the .stl of the standard base, brought it into an assembly with Pokey's case, then saved that as a single part, filled in the gap and added some support, and exported this somewhat dirty .stl file. Let me know what you think and I'll make modifications as needed, it's just not feasible to post a parametric cad file.
Recommended to print this on it's side for more strength, with 3 walls at .45mm line width so that the base tabs are solid infill. 15-20% infill elsewhere should be plenty.