Xena S Chakram
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Note - Have created another version of this where the 2 halves of the Chakram separate and are held together by…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Note - Have created another version of this where the 2 halves of the Chakram separate and are held together by magnets. See http://www.thingiverse.com/thing:1940062
Being inspired by KnightwithoutFilament's design of a Xena Chakram. http://www.thingiverse.com/thing:1273074
thought I would take a quick try at Xena's "other" Yin-Yang Chakram.
Printed with Silver PLA, glued together using craft glue, then painted with copper and bronze metallic acrylic paint and lastly sealed with high gloss varnish.
I've included the whole model as well as the 2 halves. Does require larger print bed size.
If there is a desire for quarter pieces, let me know and I will generate and include those.
If you do make one, please share a picture.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
.1mm
Infill:
10%
Notes:
Printed 2 halves and then glued together.
Am considering working on a version where the S part splits into 2 halves and are held together by magnets.
Printed using Silver PLA and then hand painted the center parts and clear coated over the paint.
Post-Printing
Tell us more...
Category: Props