Minimalistic door wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This minimalist door wedge can be used for doors that have a gap between 18 to 30mm from the floor and one for 8-14mm.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 1176
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This minimalist door wedge can be used for doors that have a gap between 18mm to 30mm from the floor.
I have also created a version with a height of 8mm. Which is suitable for a height of 8-14 mm.
The big advantage of this wedge is that it does not stand out over the door and is therefore not very visible.
This wedge is most suitable for indoor doors that should be open all the time.
If your door has a smaller or larger gap to the floor, let me know and I will customize the wedge for you.
Print instructions
Category: Household Supplies Summary
This minimalist door wedge can be used for doors that have a gap between 18mm to 30mm from the floor.
The big advantage of this wedge is that it does not stand out over the door and is therefore not very visible.
This wedge is most suitable for indoor doors that should be open all the time.
If your door has a smaller or larger gap to the floor, let me know and I will customize the wedge for you.
Print Settings
Printer: Prusa MK3S
Kodama Trinus
Rafts: No
Supports: No
Resolution: 0,15mm
Filament: PETG Das Filament PETG
Notes:
PLA would also be possible.
A fine resolution should be used because of the toothing.