Customizable Rubber Stamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small stamp (108mm x 25mm). The parts with the Text are changeable and HAVE to be PRINTED IN RUBBER…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a small stamp (108mm x 25mm).
The parts with the Text are changeable and HAVE to be PRINTED IN RUBBER (ninjaflex, tpu...) and there is an empty part included as an .stl and .sldprt file so you can edit it and put YOUR OWN TEXT using the program of your choice (make sure that the TEXT is MIRRORED so that the it looks good on paper) the top of the stamp body is also empty so you can customize it too (pictures to help are up there).
Using the tool (the tool has a whole in the top in witch you can put a small magnet by pausing the print) you can easily remove the stamping part.
The Numbers.zip file contains numbers from 0 to 9.
And i would recommend while inserting the rubber part to align the trapezoid on it withe the one on the stamp and first push in on the side opposite to the whole and then push on the edges that the easiest way i found.
I hope that you like my model and i would appreciate any feedback thank you :D !!!
Print Settings
Printer Brand:
Printrbot
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Notes:
The changeable parts are RUBBER and infill below 40% is recommended.
Category: Office