DIN Rail Wire Brush Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A DIN Rail clip that holds a wire brush
- Ocena
- 4 / 5
- Polubienia
- 23
- Pobrania
- 61
- Wydruki
- 2
- Wyświetlenia
- 425
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I designed a few DIN rail tool holders, to store my most frequently used tools on the side of my Lack enclosure. Check out my DIN Rail Tool Holders collection.
All my holders are intentionally designed with some play (or rather no huge pretension in the DIN rail clip). So, every tool can be easily arranged or repositioned by sliding the holder along the rail. Every holder can be removed with a slotted screwdriver.
I designed this holder for a brass wire brush from Lessmann. The hole in my design is 15 mm wide and 12 mm deep. You can remix my model by downloading the STEP file.
Printing orientation and settings, see 3mf file. Supports are recommended!