1 / 1
700N DFC antenna holder for Mikado RX Sat
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To route the antenna below the rx battery. Used for Legacy vbar with mikado rx sat.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
To route the antenna below the rx battery.
Used for Legacy vbar with mikado rx sat.
This was the easiest way i managed to route the antennas on this model.
Signal coverage is not optimal if seen straight from behind the model, but probably good enough.
use on you own risk :)
Print instructions
Print without supports, with a 0.4 nozzle.