chicken feeder hood/ opening
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An opening for free feeding chickens using a larger container. This little hood is placed in a 3 in diameter hole.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 268
- Wydruki
- 0
- Wyświetlenia
- 2072
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A chicken feeder opening, for use on a 5 gal. bucket/ 55 gal plastic drum, or really whatever large container you choose, to free-feed chickens or other fowl. Designed using Fusion 360, printed for a 3" diameter hole, but is easily adjusted for larger or smaller holes in the design. The model was printed using IIIDMax PETG, but any weather-tolerant filament would work, and if your feeder is protected you could probably get away with PLA, just depends on your local environment. Printed at .3 layer height and standard Prusa settings with organic painted-on supports.