Multimaterial Y joiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've seen a lot of similar designs, but nothing I liked. So I decided to design my own.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
REUPLOAD FROM THINGIVERSE!
I've seen a lot of similar designs, but nothing I liked.
So I decided to design my own.
I did a lot of variations of standard designs and a lot of lot of tests.
The result is here!
It's small and works like a charm!
I've made a lot of prints with it and I had no issues.
You can find it also as part of the RepRapLtd MultiFilament repository: https://github.com/RepRapLtd/RepRap-MultiFilament/tree/master/Filament-Y
Print Settings
Resolution: 0.12
Infill: 100
BOM
Screws: 4 x M3*8
Nuts: 4 x M3
PTFE Tube: 4x2
Pneumatic Connector: PC4-01 M10