X1C Rotatable Spool Holder Side Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side filament spool mount for a Rotatable Spool Holder.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 1412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I designed a Rotatable Spool Holder Mount for the back of the printer, but want one for the side.
The X1C Side Mount Rotatable Spool Holder allows you to use a “608ZZ Bearing Rotatable For Filament Spool Holder” on your Bambu Lab X1C. The non-rotatable Spool Holder is standard on most Creality Printers. Using the mount a Spool Holder could easily be added or removed as needed.
The 608ZZ Spool Holder is available for purchase on aliexpress (https://www.aliexpress.us/) and Amazon (https://www.amazon.com/). Note: All the Amazon products included the metal bracket that you do not need, but some Aliexpress vendors sell the “Bearing Rotatable For Filament Spool Holder” separately.
Printing
- I used 0.20 layer height @ 25% infill with Petg
- With tree supports
- Align on the build plate with the arm pointing up
Parts
- 1 x m3 x 14mm for the top screw hole (do not use larger, bottoms out)
- 2 x m3 x 18mm for the bottom screw holes.
Assembly
Screw to the side of the case using the top back case screw hole and the 2 original screw holes.
Attach Rotatable Spool Holder when needed.
If you would like to buy me a cup of coffee.