wobbly ball cat toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ball that wobbles as it rolls
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 127
- Wydruki
- 1
- Wyświetlenia
- 695
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This is a simple ball printed in two halves. One half is printed with 90% infill and the other 10% infill. When assembled the mass of the ball is off center so it rolls erratically making it more fun for cats to play with. There is a small hole in the center to insert a piece of 1.75 mm filament to help align it while gluing the halves together.
This model was created using the shape gallery inside PrusaSlicer. The picture in the 3D viewer is not a good representation, you need to open the file in PrusaSlicer to get a good look at it. The model is two spheres, half of each is under the print bed, so only the top half prints, so you end up with 2 half spheres that you glue together.