WiHa Screwdrivers - Schraubendreher Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Didn't like the Velcro wrap with the tools. Now I have better overview, although it sizes a bit more.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on Yanev's cool design, another tool box. Today for WiHa screwdrivers. Velcro wrap was not really practical for me. Inlet has snappers to hold the individual tools.
Put the WiHa (Willi Hahn, Wuppertal, Germany) logo on the lid. Printed first base layers in light grey, from layer #4 in dark grey. Lid has marked places for a 1-1.5mm thick adhesive foam pad. Keeps your tools in place without shattering.
Prusa MK3S+ with MMU2s.
TinkerCad for final designworks.
PLA filament. Inlet in yellow PETG, maybe better spring attitude for the snappers.
Note: Files section contains for the base box two versions (#5A and #5B). #5B has four holes for using countersunk self-tapping screws to hold inlet in place in the box. Inlet has four holes none-the-less. It is a question of exchangeability.
Edit (28-Feb-2023): added modified latch (which is shorter).