1 / 2
RG300/RG35xx Retro Gaming Handheld Grip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grip for the Anbernic retro gaming handhelds RG300 and RG35xx
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
Simple remix of the Retro Gaming Handheld Ergonomic Grip by gevo4258, which slightly adjusts the opening at the bottom so that the grip can be used with the Anbernic RG300 and RG35xx.
Can be printed with PLA, but needs support. Mine was printed with the following settings:
- Nozzle: 0.4mm
- Line width: 0.44mm
- Layer height: 0.2mm
- Walls: 3
- Bottom/Top layer: 3
- Infill: 15%
- Support: Yes
Also have a look at my other grip, which is a from the ground up new design and comes with additional accessories: Anbernic RG300 Grip, Front Cover, Stand