7x7.3 Dragchain ends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With my small 3D router, the cables of the milling spindle are to be laid in a drag chain.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 433
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
With my small 3D router, the cables of the milling spindle are to be laid in a drag chain. Since I am extremely stingy economical and therefore like to recycle leftovers, I used a leftover piece of a 7×7.3 drag chain. Since the ends of the other part of the drag chain are installed elsewhere, I just scribbled and printed out 2 ends in 3D. Fits.
Print instructions
Category: 3D Printer Parts Summary
With my small 3D router, the cables of the milling spindle are to be laid in a drag chain. Since I am extremely stingy economical and therefore like to recycle leftovers, I used a leftover piece of a 7×7.3 drag chain. Since the ends of the other part of the drag chain are installed elsewhere, I just scribbled and printed out 2 ends in 3D. Fits.
Print Settings
Printer Brand: Anycubic
Printer: All-metal Mega
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0,16
Infill: 20%
Filament: Goedis PETG Light Grey