Tool Holder for Channellock HP-4A Hook & Pick Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recently I came across the Channellock Hook & Pick Set at joshfulford's Hook and Pick Set Pegboard Holder.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 176
- Wydruki
- 1
- Wyświetlenia
- 900
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Recently I came across the Channellock Hook & Pick Set at joshfulford's Hook and Pick Set Pegboard Holder. I immediately thought that these tools might be good for removing 3D printing support, and I looked for alternatives among the usual suspects. However, I quickly come back to the "original" from the U.S., which are made in tolerable quality and are also available at a good price through A**n.
The catch is: There is no clever holder, from joshfulford is ok, but it is intended for a pegboard that I do not have. I need a holder that can be easily screwed on anywhere with two screws. So I just scribbled one in FreeCAD and made it available to you. Maybe one or the other might need it. You can mount it on the outside of a shelf, as it is only 15mm thick and has two 5mm holes for countersunk screws.
Some of the links are suggestions for parts to replicate the thing and affiliate. If you buy something, I get a small commission. The price you pay is the same. Thank you very much.
Print instructions
Category: Hand Tools Summary
Recently I came across the Channellock Hook & Pick Set at joshfulford's Hook and Pick Set Pegboard Holder. I immediately thought that these tools might be good for removing 3D printing support, and I looked for alternatives among the usual suspects. However, I quickly come back to the "original" from the U.S., which are made in tolerable quality and are also available at a good price through A**n.
The catch is: There is no clever holder, from joshfulford is ok, but it is intended for a pegboard that I do not have. I need a holder that can be easily screwed on anywhere with two screws. So I just scribbled one in FreeCAD and made it available to you. Maybe one or the other might need it. You can mount it on the outside of a shelf, as it is only 15mm thick and has two 5mm holes for countersunk screws.
Some of the links are suggestions for parts to replicate the thing and affiliate. If you buy something, I get a small commission. The price you pay is the same. Thank you very much.
Print Settings
Printer Brand: Anycubic
Printer: All-metal Mega
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15%
Filament: ALICIA 3DP by Bohrers PLA Magic Carbon
Notes:
Nozzle: 220° Celsius
Bed: 60° Celsius