1 / 3
Scuttle Bug kids folding trike footrest, topology optimised, generative design — zdjęcie 1
1 / 3

Scuttle Bug kids folding trike footrest, topology optimised, generative design

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Footrest for Scuttle Bug brand fold-able trike for infants.

Ocena
0 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
720
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Footrest for Scuttle Bug brand fold-able trike for infants. I used generative design simulation to remove some material with approx. 3kg load on each side.
Footrest has to be removed to fold trike. A small amount of thin foam tape can be placed around stem of trike to absorb clearance required for installation.

Print instructions

Printed in ASA or PETG 0.2mm layer height, at least 50% infill with 4 perimeters. Item shown in photos printed solid but probably not required.

Tagi