3018 DIY CNC: T8 Leadscrew / Anti Backlash / Spring-loaded nut Bearing Block for Y Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In addition to my remix of the bearing block for the floating bearing of the Y-axis, I have constructed a bearing…
- Ocena
- 4,667 / 5
- Polubienia
- 86
- Pobrania
- 1030
- Wydruki
- 2
- Wyświetlenia
- 4213
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
In addition to my remix of the bearing block for the floating bearing of the Y-axis, I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard threaded spindles with no play. I installed some of these on my mill.
The holes for securing the spindle nut with M3 x15 screws are without thread, please do it yourself with a tap, the necessary precision is usually not given with 3D printing, so I did not insert the thread.
Note: The spring must move freely and press the lock nut away from the spindle nut.
See also my remix of the Spindle / Engineholder: T8 Leadscrew / Anti Backlash / Spring-loaded nut Spindle Head
Print instructions
Category: 3D Printer Parts Summary
In addition to my remix of the bearing block for the floating bearing of the Y-axis, I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard threaded spindles with no play. I installed some of these on my mill.
The holes for securing the spindle nut with M3 x15 screws are without thread, please do it yourself with a tap, the necessary precision is usually not given with 3D printing, so I did not insert the thread.
Note: The spring must move freely and press the lock nut away from the spindle nut.
See also my remix of the Spindle / Engineholder: T8 Leadscrew / Anti Backlash / Spring-loaded nut Spindle Head
Print Settings
Printer Brand: Anycubic
Printer: All-metal Mega
Resolution: 0.2mm
Infill: 15%
Filament: All3dp PLA Red