1 / 2
90's Jeep Grand Cherokee Hood prop clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this for a friend, this is the 10th iteration. Currently made of PETG, however ASA might be a better fit.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
Print on its side, so that the layer lines are going horizontal.
Supports are needed!
Highly suggest printing with full walls for strength. Any infill might allow cracking instead of bending.
