Ikarus Dragstair - Signalétique cage (Cage signage)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Imprimé en PLA noir. Printed in PLA black.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également !
Pour accompagner le dispositif de propulsion, une signalisation était nécessaire ! Donc j’ai modélisé cette pièce pour indiquer le danger que représente l’hélice tournante. Le lettrage est repassé avec un Posca rouge. Quelques projections de rouge avec celui-ci ont été crées volontairement. Pour finir un vernis colle a été appliqué pour protéger la peinture, celle-ci étant sensible à l’eau !
I had the opportunity to find a second-hand Dragstair hovercraft from the Ikarus brand, but it needed a good overhaul… A serious restoration as well !
To accompany the propulsion device, signaling was necessary ! So I modeled this piece to indicate the danger of the spinning propeller. The lettering is ironed with a red Posca. Some projections of red with this one were created voluntarily. Finally, a glue varnish was applied to protect the paint, which is sensitive to water !