1 / 2
Kryptonite lock sleeve
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your frame's paint from the sharp aluminum rail on the lock.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Slides over the aluminum rail protrusion of a Kryptonite lock and latches on it.
I keep my lock in my bag so the rail isn't useful but damages the frame's paint when locked.
I printed mine in PETG and they hold well. I don't know if PLA would work as well because of the wide range of temperatures outdoors and because the part needs a little flex for the tab to latch. Although if you don't constantly remove and put the sleeve back, it shouldn't matter too much.
Tested to fit on the grey u-lock and the orange u-lock models.