Sodastream Easy - repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My sodastream got broke... i think this might be the most frequent reason. You can find this problem with the broken…
- Ocena
- 4,857 / 5
- Polubienia
- 15
- Pobrania
- 192
- Wydruki
- 5
- Wyświetlenia
- 1128
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
My sodastream got broke... i think this might be the most frequent reason. You can find this problem with the broken plate for the locking pin, everywhere in the internet.
Ok... got a printer, so i can print a new lever... but why exchange a big thing, when there might be a easier and faster solution?
What to do.
- Glue the broken part with some superglue, meanwhile print this litte helper.
- Remove the locking pin carefully by pressing it out to one side.
- Mount the glued lever, and press in the locking pin
- Push the helper from the back on the lever.
- you can add some glue to keep the helper in place, but this is not really necessary.
- use the Sodastream
Have fun!
If you don't trust the glued part, you can user a longer locking pin to use the holes of the helper too.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.24
Infill:
100%
Filament: Schmelzbar PLA white
Notes:
i used support from bed only with conical support.
Category: Household