Hummingbird Feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hummingbird Feeder. My old feeders had big reservoirs upside down. They leaked and attracted bees, ants, and earwigs.…
- Ocena
- 4,667 / 5
- Polubienia
- 30
- Pobrania
- 133
- Wydruki
- 3
- Wyświetlenia
- 1367
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Hummingbird Feeder.
My old feeders had big reservoirs upside down. They leaked and attracted bees, ants, and earwigs. Also the nectar would become alcoholic after 1 day in the Colorado sun.
This rework has a small reservoir that faces up. It will not leak. The ports are guarded so that bees cannot reach the nectar but hummingbirds can.
Add the trap on the hanging cord and fill it with regular water. That keeps the ants and earwigs out.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3 mm layers
Infill:
yes
Filament: generic PetG Red!
Notes:
Print with 4 perimeters or more so the walls of the base are solid. Most parts can be printed without support. Orient the trap with the large side down.
Print the post lying on its side with the small hole vertical. Use support under the threads.
Add a bit or brass wire (or other similar) to form the hanging hook. This should be small enough to allow the lid to be opened.
Category: Outdoor & Garden