Fastex Buckle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Fastex style side release buckle for 3/4" (~19 mm) webbing. Not quite parametric. You will need to edit the…
- Ocena
- 4,5 / 5
- Polubienia
- 40
- Pobrania
- 491
- Wydruki
- 3
- Wyświetlenia
- 2370
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a Fastex style side release buckle for 3/4" (~19 mm) webbing.
Not quite parametric. You will need to edit the Fastex.scad file to adjust the width of the webbing. This version has not been tested much so it might need other changes.
Made these because I wanted pure White buckles for an art project. Nice to be able to print in any color.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.3 mm layers
Infill:
20% honeycomb,
Filament: generic PetG any
Notes:
Print with support turned on everywhere, not just on the build plate. 3 perimeters, 4 top, 4 bottom, 20% honeycomb fill, PetG.
It will be difficult to remove the support from the female part. Go slowly and be gentle so you don't break the layers apart on the z-axis.Due to the flexible arms of the male part this might not work in PLA. PetG has more flex.
Category: Sport & Outdoors