Wall-mount ZipTie / Cable Tie Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 100 / 140 / 170 / 200 mm cable ties. Mounts to the wall, toolboard etc.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 473
- Wydruki
- 2
- Wyświetlenia
- 1604
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I found this holder here on printables:
https://www.printables.com/model/141465-parametric-ziptie-zip-tie-holder
It' configurable … but I wanted to mount it to my tool board and had to find out that creating some “angled ears” is really unintuitive in OpenSCAD.
So I created a similar holder in SolidEdge, which is my favourite 3D modelling software. I also include a STEP file so you can make some changes if you like.
The compartments I have designed are for cable ties of 100, 140, 170 and 200 mm length.
I included some chamfers and holes in the bottom as well as an offset to the wall so dust can be removed with an airgun.