1 / 1
SYMFONISK remote gen. 2 to FUGA wall switch — zdjęcie 1

SYMFONISK remote gen. 2 to FUGA wall switch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a project to convert IKEAs SONOS remote gen. 2 to a LK FUGA wall switch.

Ocena
0 / 5
Polubienia
28
Pobrania
96
Wydruki
0
Wyświetlenia
3356
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a project to convert IKEAs SONOS remote gen. 2 to a LK FUGA wall switch.

Note is it only a psychical conversion. The electric components are the same, except the size of the battery and switches.

Bestilling af dele

Gå til indkob.ccx.dk

Introduction of the SYMFONISK remote gen. 2

 

Functions of buttons on original remote

Red are functions when paired directly with a lightbulb.

 

Location of buttons when inteted to used with SONOS

Alternative location or other systems

Left: Indented to be used directly in IKEAs system. The buttons ▶⏹ are the same.

Right: Indented to be used in a system that allows remapping of the buttons functions. To change to this mode: rotate the remote and flip the slides switches to the up potiton.

 

Electric diagram

 

Reverse engineering of original PCB

 

Front side of custom PCB

Flashing guide

https://t365.dk/flash-ikea-zigbee-j-link/