Special supports for child safety barrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets for attaching the Munchkin MK0001 safety barrier to a stair railing.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
My nephew has started to crawl!!!
Brackets for attaching the Munchkin MK0001 safety barrier to a stair railing.
Perhaps you find yourself in need of fixing a child safety barrier to a railing without damaging it. Here you have a solution, in case it serves as an idea.
The pieces are printed with a slight interference with the railing so that they are fixed by pressure.
I leave the stp files in case they might be of use to you. You will have to adapt the design to the measurements of your railing.
Look at the interior detail of this pieces.

In this design, 4 M5x20 DIN 912 screws are necessary in each support.
The thread is machined directly on the Tac part with machine taps. This operation must be done very slowly so that the taps does not heat up and melt the plastic.
Assembly:


I have used Prusament PETG with very good results.
Basic print settings:
perimeters: 6
top_solid_layers: 10
bottom_solid_layers: 8
layer_height: 0,2
fill_pattern: triangles
fill_density: 20%