Kitchen Sink Organizer Add-ons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add-ons for the original "Kitchen Sink Organizer"
- Ocena
- 4,5 / 5
- Polubienia
- 1924
- Pobrania
- 2284
- Wydruki
- 9
- Wyświetlenia
- 31 964
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a collection of remixes or add-ons for the awesome “Kitchen Sink Organizer” from @Ruiaxe. Our sink is a bit bigger so it couldn't fit the organizer. Decided to remix the original model and created a few additions that might come in handy to others:
- 3 smaller sized “Baskets” (5cm, 7cm and 10cm) that can be added as attachments in order to extend the length of the organizer
- 2 larger “Laterals” that have an extension towards the tap-area
- 2 larger “Topsides” for the extended “Lateral” (inserted/flat versions)
Original model: https://www.printables.com/model/366893-kitchen-sink-organizer
Printing instructions
- Material: I used PLA+ for all parts. Marble for the Laterals to match the countertop and black/grey to match the sink.
- Layer Height: .2
- Infill: 15%
- Walls: 3 for extra strenght
- Supports: Yes (only for the sides where the latches are, blocked the hex-pattern on baskets.
- Brim: Recommended (might require filing/sanding)
- Raft: No
Printed on: FLSUN v400
Assembly
Just slide the side in the parts. Some force may be needed. No glue is required.